|
Order Processing Time
1-2 Business Days
|
Waterlife & Beach Molds
|
2 Dolphins Soap Mold
Dimensions: 3.5 x 2.75 x 1.25
Number of Cavities: 3
Ounces: 3.5
Two Dolphins Soap Mold for melt & pour soap base as well as cold process soap (CP soap).
Soap molds can tolerate temperatures up to 135 to 145° F. Above these temperatures, warping may occur. Soap is easiest to release 12 - 24 hours after cooling. Please do not manhandle the molds when releasing contents! If you have any difficulties, place the soap molds in your freezer for 30 minutes to an hour. To clean mold, soak in warm water for a half hour or so. Hot water, including dishwasher water, may warp the plastic.
Customers who purchased Two Dolphins Soap Molds also purchased soap making supplies, bulk melt and pour soap bases, candle making supplies, and lip balm labels.
|
|
|
Clam Shell Soap Mold
Dimensions: 3" x 3.5" x 1.2" deep
Number of Cavities: 3
Ounces: 5
Clam Shell soap molds for melt & pour soap as well as cold process soap (CP soap).
Soap molds can tolerate temperatures of 135-145° F. Above these temperatures, warping may occur. Soap is easiest to release 12 to 24 hours after cooling. Please don't manhandle the molds when releasing contents! If you have any difficulties, place the soap molds in your freezer for about an hour. To clean mold, soak in warm water for a half hour or so. Hot water, including dishwasher water, may warp the plastic.
Customers who purchased Rectangle Soap Molds also purchased melt and pour soap base, soap coloring, lip balm labels, and candle making supplies.
|
|
|
Fossil Shell Soap Mold
Dimensions: 3.7" x 3.1" x 1.25" deep
Number of Cavities: 3
Ounces: 4
Fossil Shell soap molds for melt & pour soap as well as cold process soap (CP soap).
Soap molds can tolerate temperatures of 135-145° F. Above these temperatures, warping may occur. Soap is easiest to release 12 to 24 hours after cooling. Please don't manhandle the molds when releasing contents! If you have any difficulties, place the soap molds in your freezer for about an hour. To clean mold, soak in warm water for a half hour or so. Hot water, including dishwasher water, may warp the plastic.
Customers who purchased Fossil Shell Soap Molds also purchased melt and pour soap base, soap colors, lip balm labels, and candle making supplies.
|
|
|
Lilypad Soap Mold
Dimensions: 2.75 x 1
Number of Cavities: 3
Ounces: 4
Lily Pad Soap Mold for melt & pour soap base as well as cold process soap (CP soap).
Soap molds can tolerate temperatures up to 135 to 145° F. Above these temperatures, warping may occur. Soap is easiest to release 12 - 24 hours after cooling. Please do not manhandle the molds when releasing contents! If you have any difficulties, place the soap molds in your freezer for 30 minutes to an hour. To clean mold, soak in warm water for a half hour or so. Hot water, including dishwasher water, may warp the plastic.
Customers who purchased Lily Pad Soap Molds also purchased soap making supplies, bulk melt and pour soap bases, candle making supplies, and lip balm labels.
|
|
|
Pebble Rock Bar Soap Mold
Dimensions: 3.6 x 2.5 x 1 1/8
Number of Cavities: 3
Ounces: 4.83
Pebble Rock Bar Soap Molds for melt & pour soap base and cold process soap (CP soap). Soap molds can tolerate temperatures up to about 135° to 145° F. Above these temperatures, warping can occur. Soap is easiest to release 12 to 24 hours after cooling. Please don't manhandle the molds when releasing contents! If you have any difficulties, place the soap molds in your freezer for about a half hour. To clean mold, soak in warm water for a half hour or so. Hot water, including dishwasher water, may warp the plastic.
Customers who bought Pebble Rock Bar Soap Molds also purchased soap coloring, melt and pour soap bases, lip balm labels, and wholesale candle making supplies.
|
|
|
Sammy Turtle Soap Mold
Measures 4.5” from head to tail length.
Measures 4.25” from front fin to fin diameter.
Number of Cavities: 3
Ounces: 3
Sammy Turtle Soap Molds for melt & pour soap base as well as cold process soap (CP soap). Soap molds can tolerate temperatures up to about 135 to 145° F. Above these temperatures, warping can occur. Soap is easiest to release 12 to 24 hours after cooling. Please don't manhandle the molds when releasing contents! If you have any difficulties, place the soap molds in your freezer for about a half hour. To clean mold, soak in warm water for a half hour or so. Hot water, including dishwasher water, may warp the plastic.
Customers who purchased Sammy Turtle Soap Molds also purchased bar soap molds, melt and pour soap bases, soap scents, and wholesale candle making supplies.
|
|
|
Starfish Soap Mold
Dimensions: 3” diameter x 1 1/4 deep
Number of Cavities: 3
Ounces: 4
Starfish Soap Molds for melt & pour soap base as well as cold process soap (CP soap). Soap molds can tolerate temperatures up to about 135 to 145° F. Above these temperatures, warping can occur. Soap is easiest to release 12 to 24 hours after cooling. Please don't manhandle the molds when releasing contents! If you have any difficulties, place the soap molds in your freezer for about a half hour. To clean mold, soak in warm water for a half hour or so. Hot water, including dishwasher water, may warp the plastic.
Customers who purchased Starfish Soap Molds also purchased melt and pour soap bases, soap coloring, soap loaf molds, labels for lip balm tubes, and wholesale candle making supplies.
|
|
|
Turtle Soap Mold
Dimensions: 3 x 3 x 1.25
Number of Cavities: 3
Ounces: 4.75
Turtle Soap Mold for melt & pour soap base as well as cold process soap (CP soap).
Soap molds can tolerate temperatures up to 135 to 145° F. Above these temperatures, warping may occur. Soap is easiest to release 12 - 24 hours after cooling. Please do not manhandle the molds when releasing contents! If you have any difficulties, place the soap molds in your freezer for 30 minutes to an hour. To clean mold, soak in warm water for a half hour or so. Hot water, including dishwasher water, may warp the plastic.
Customers who purchased Turtle Soap Molds also purchased soap making supplies, bulk melt and pour soap bases, candle making supplies, and lip balm labels.
|
|
|
Wave 1 Soap Mold
Dimensions: 3.75 x 2.25 x 1
Number of Cavities: 4
Ounces: 3.5
Wave 1 soap molds for melt & pour soap bases as well as cold process soap (CP soap).
Soap molds can tolerate temperatures of 135-145° F. Above these temperatures, warping may occur. Soap is easiest to release 12 to 24 hours after cooling. Please don't manhandle the molds when releasing contents! If you have any difficulties, place the soap molds in your freezer for about an hour. To clean mold, soak in warm water for a half hour or so. Hot water, including dishwasher water, may warp the plastic.
Customers who purchased Wave 1 Soap Molds also purchased soap fragrance oils, soap colors, soap loaf molds, and sheer organza bags.
|
|
|
Wave 2 Soap Mold
Dimensions: 4 x 2.5 x 1.25
Number of Cavities: 3
Ounces: 3.75
Wave 2 Soap Molds for melt & pour soap as well as cold process soap (CP soap).
Soap molds can tolerate temperatures of 135-145° F. Above these temperatures, warping may occur. Soap is easiest to release 12 to 24 hours after cooling. Please don't manhandle the molds when releasing contents! If you have any difficulties, place the soap molds in your freezer for about an hour. To clean mold, soak in warm water for a half hour or so. Hot water, including dishwasher water, may warp the plastic.
Customers who purchased Wave 2 Soap Mold also purchased soap making supplies, candle making supplies, wholesale melt and pour soap bases, and soap colorants.
|
|
|
Wave Bar Soap Mold
Dimensions: 3.3" x 1.45" deep
Number of Cavities: 3
Ounces: 5.5
Wave Bar soap molds for melt & pour soap as well as cold process soap (CP soap).
Soap molds can tolerate temperatures of 135-145° F. Above these temperatures, warping may occur. Soap is easiest to release 12 to 24 hours after cooling. Please don't manhandle the molds when releasing contents! If you have any difficulties, place the soap molds in your freezer for about an hour. To clean mold, soak in warm water for a half hour or so. Hot water, including dishwasher water, may warp the plastic.
Customers who purchased Wave Bar Soap Molds also purchased melt and pour soap base, soap colorants, labels for lip balm tins, and candle making supplies.
|
|
|
